VIPA 313-6CF03, Руководство пользователя, Страница: 88 / 152

Chapter 5 Deployment I/O periphery
Manual VIPA System 300S SPEED7
5-2 HB140E - CPU SC - RE_313-6CF03 - Rev. 07/45
Overview
At the CPU 313SC/DPM the connectors for digital in-/output and
technological functions are integrated to a 2tier casing.
The project engineering takes place in the Siemens SIMATIC manager as
CPU 313C-2DP from Siemens (6ES7 313-6CF03-0AB0 V2.0).
Here the CPU is parameterized by the "Properties" dialog of the
CPU 313C-2DP.
For parameterization of the digital I/O periphery and the technological
functions the corresponding submodule of the CPU 313C-2DP may be
used.
By including the speedbus.gsd the VIPA specific parameters of the
SPEED7 CPU may be set during hardware configuration. So for example
the integrated RS485 interface may be parameterized.
The integrated I/Os of the CPU 313SC/DPM may be used for technological
functions or as standard I/Os.
Technological functions and standard I/Os may be used simultaneously
with appropriate hardware. Read access to inputs used by technological
functions is possible. Write access to used outputs is not possible.
Up to 3 channels may be parameterized as technological function. The
parameterization of the appropriate channel is made in the hardware
configurator by the
count
submodule of the CPU 313C-2DP.
There are the following technological functions:
•
Continuous count
•
Single count
•
Periodic count
The controlling of the corresponding counter mode happens by means of
the SFB COUNT (SFB 47) of the user program.
General
Project
engineering
I/O periphery
Technological
functions