VIPA 313-6CF03, Руководство пользователя, Страница: 48 / 152

Chapter 4 Deployment CPU 313SC/DPM
Manual VIPA System 300S SPEED7
4-8 HB140E - CPU SC - RE_313-6CF03 - Rev. 07/45
•
Establish a network connection between Ethernet PG/OP channel of the
CPU and PC.
•
Start the Siemens SIMATIC manager at the PC.
•
Set via
Options
>
Set PG/PC Interface
the Access Path to
"TCP/IP -> Network card .... Protocol RFC 1006".
•
Open with
PLC
>
Assign Ethernet Address
the dialog window for
"initialization" of a station.
•
Use the [Browse] button to determine the CPU components via MAC
address.
As long as the Ethernet PG/OP channel was not initialized yet, this owns
the IP address 0.0.0.0 and the station name "Onboard PG/OP".
•
Choose the determined module and click to [OK].
•
Set the IP configuration by entering IP address, subnet mask and net
transition. In addition an IP address may be received from a DHCP
server. For this depending upon the selected option the MAC address,
device name or the Client ID, which may be entered here, is to be
conveyed to the DHCP server. The Client-ID is a character sequence
from maximally 63 characters.
Here the following indications may be used: Dash "-", 0-9, A-z, A-Z
•
Confirm your settings by button [Assign Address]
Direct after the assignment the Ethernet PG/OP channel may be reached
by the Siemens SIMATIC manager by means of these IP address
parameters and the
Access Path
"TCP/IP -> Network card .... Protocol
RFC 1006".