Vimar Idea 1657 Series, Инструкция по эксплуатации

Страница: 30 / 100

26 - ENGLISH
To program the electronic thermostat, from the starting screen of the
display, press any one of the four front buttons .
The following icons appear:
- “
Esc
” (button A ): cancels the selection .
- “  ” (button B ): displays the value of the currently active tempera-
ture set-point (Ts) and, when the button is next pressed, allows
this value to be reduced by the desired amount; pressing “
Set ”
(button D) causes this new value to remain active until the next pro-
grammed temperature set-point change, after which the program
stored in memory is resumed .
- “  ” (button C ): displays the value of the currently active tempera-
ture set-point (Ts) and, when the button is next pressed, allows
this value to be increased by the desired amount; pressing “
Set ”
(button D) causes this new value to remain active until the next pro-
grammed temperature set-point change, after which the program
stored in memory is resumed .
- “ Menù ” (button D ): used for accessing the “ Operation ” menu .
• Press “  ” (button B ): the “ Settings ” and “ Programming ” menu
items appear; “

” (button C ) scrolls up in the menu, “ ok ” (button
D ) selects the desired menu, and “ Esc ” (button A ) returns to the
starting screen .
7.1 OPERATION.
Selects the operating mode of the programmable thermostat,
choosing between
“Auto/Manual” , “Switching off” , “Heating/Air
Con.”
,
“Antifreeze”
.
- Confirm “ ok ” (button D ) = scroll menu using “

” (button B ) and “

”
(button C ), select setting using “ Set ” (buton D ) for “Auto/Manual” ,
“Switching off” , “Heating/Air Con.” , “Antifreeze”.
• AUTO/MANUAL.
Configures the programmable thermostat for either automatic or
manual operation .
In “ Automatic ” mode, the temperature is regulated by the cur-
rently active programme stored in memory (see “ Select Prog. ”,
page 28) .
In “ Manual ”mode, the switch-on and switch-off of the heating or
cooling system can be controlled manually:
- “
 ” (button B ): displays the value of the currently active tem-
perature set-point (Ts) and, when the button is next pressed,
allows this value to be reduced as required .
- “  ” (button
C
): displays the value of the currently active tem-
perature set-point (Ts) and, when the button is next pressed,
allows this value to be increased as desired .
7. USING THE ELECTRONIC TIME-PROGRAMMABLE THERMOSTAT.