Viking Designer Ruby, Руководство пользователя

Страница: 93 / 116

E
MBROIDERY
S
TITCH
-O
UT
8:7
FULL SCREEN
To view your design as large as possible, use the full screen
function. The embroidery will
À ll the whole screen. To
close, touch the screen once.
MONOCHROME
Touch the icon to activate monochrome embroidery. All
designs are shown in a grey color and the machine does not
stop for color block changes. To deactivate monochrome
embroidery, touch the icon again.
Note: If the Automatic Jump Stitch Trim function is selected in the
SET Menu it will still be active between the color blocks.
Note: You can also touch the STOP button on your machine to stitch
out your design in one color.
CORNER CHECK
Corner Check can be used to trace the four corners of the
design so that you can see where the design will be on the
fabric. Touch the corner check icon. Each time you touch
the icon it will move the hoop in the following order: upper
left, upper right, lower right, lower left and then go back to
the current stitch position.
Full screen
Monochrome
Corner check
Zoom In/Out
Zoom to Hoop
Zoom to Box
Zoom to All
Remaining embroidery time
by color
ZOOM
Zoom In/Out
Use to zoom in or out of the embroidery À eld. Use Zoom In
(+) to get a close-up view of an area within the embroidery
design. Use (-) to Zoom Out to view the entire design.
Zoom to Hoop
Zoom to Hoop will adjust the embroidery À eld to À t the
selected hoop.
Zoom to All
Zoom to All will show all the design(s) in the embroidery
combination.
Zoom to Box
Touch and drag your stylus in the embroidery À eld on the
screen to create a box. The screen zooms to show that
speci
À c area.
REMAINING EMBROIDERY TIME BY
COLOR
An estimation of the remaining embroidery time for the
current color block is displayed in hours and minutes in the
lower left corner of the screen. If Monochrome is activated
(see above), the estimated remaining embroidery time for the
whole embroidery is displayed.