Viking Designer Ruby Скачать руководство пользователя страница 41

Страница: 41 / 116

ETTINGS

& F

UNCTIONS

3:11

Sensor Foot Up and Extra Lift

Needle Stop Up/Down

(Trim Position)

Speed - and +

STOP

(Monochrome)

FIX

(Baste)

Reverse

Start/Stop

Selective Thread Cutter

Sensor Foot Down and Pivot

SPEED + AND -

All stitches in your machine and each hoop size have a pre-
set, recommended sewing/embroidery speed.

Touch Speed + or Speed - to increase or decrease the
maximum allowed sewing/embroidery speed. When not
sewing/embroidering, touch Speed and a pop-up message
on the screen will indicate the speed set ting. You can set the
speed by touching the slider in the pop-up message. If you
change the speed set ting while sewing/embroidering no
pop-up message will appear.

When sewing with metallic threads, or when sewing on
delicate fabrics, lower the speed for optimal results.

STOP ( MONOCHROME)

Sewing Mode

Select STOP to conclude a stitch. Your machine

xes the

thread and stops automatically when one stitch or stitch
program has been completed. When STOP is selected
only one stitch is displayed on the Interactive Color Touch
Screen. The STOP button lights up when you touch it.
Select STOP again to cancel or by selecting a new stitch.
The STOP button light will go out. The STOP function
can be programmed, see program chapter. The STOP
function is cancelled when the stitch is completed.

Embroidery Stitch-Out

Select STOP to eliminate stops for color changes and
create monochrome embroidery, see Embroidery Stitch-
Out chapter.

FUNCTION BUTTONS

(Embroidery Mode functions are in brackets)

FIX ( BASTE)

Sewing Mode

FIX is used to tie off  a stitch. FIX is automatically activated
when you select a stitch, use the Selective Thread Cutter,
select Stitch Re-Start, STOP or by touching FIX while you
are sewing. At the beginning, your machine sews a few tie-off
stitches and continues with the selected stitch. Touch FIX
while sewing and your machine sews a few tie-off  stitches and
stops automatically. The FIX button lights up when the FIX
function is active. Touch the lit button to turn the function off.
The FIX function can be programmed, see Program chapter.

Note: FIX Auto can be cancelled in the SET Menu, Machine
Settings (see page 3:7). No tie-off stitches will be sewn unless you
select the FIX button on your machine.

Embroidery Stitch-Out

Touch FIX to baste an outline of the embroidery design
area or to baste the fabric to the stabilizer.

REVERSE

For permanent reverse, press the Reverse button once
before starting to sew. The reverse indicator will be lit and
the machine sews in reverse until you press the button
again to cancel. If you press the reverse button while
sewing, the machine will sew in reverse for as long as you
keep the button pressed. The reverse indicator is lit when
the reverse button is pressed.

Reverse is also used when sewing buttonholes, darning
stitches and tapering stitches to step between the parts of
the stitch.

Reverse has no function in Embroidery Mode.