Viking Designer Ruby, Руководство пользователя

Страница: 70 / 116

6:2
37
38
39
40
41
40
A
B
C
D
F
E
G
EMBROIDERY UNIT OVERVIEW
(type BE18)
37. Embroidery unit release button (underside)
38.
Embroidery arm
39. Embroidery hoop attachment
40. Level adjustment feet
41. Embroidery unit socket
EMBROIDERY HOOP OVERVIEW
A Embroidery hoop connector
B
Outer hoop
C Inner hoop
D Quick release
E Retaining screw
F Ribs for À tting the clips
G Center marks
When removing the embroidery unit
from the box for the
À rst time, be sure
the shipping brace on the underside of
the embroidery unit has been removed.
CONNECT THE EMBROIDERY UNIT
1. Slide the sewing accessory tray off.
2. There is a covered socket at the back of the machine.
Turn the cover to the right to open it. The embroidery
unit plugs into the socket.
3. Slide the embroidery unit onto the free arm of the
machine until it plugs À rmly into the socket. If needed,
use the level adjusting feet so that the machine and
embroidery unit are even. If the machine is turned off,
turn it on.
4. A pop-up message tells you to clear the embroidery
arm and remove the hoop for positioning. Touch OK.
The machine will calibrate and the embroidery arm will
move to the ready position.
Note: DO NOT calibrate the machine with the embroidery hoop
attached as this can damage the needle, presser foot, hoop and/or
the embroidery unit. Be sure to clear all materials from around the
machine before calibrating so that the embroidery arm does not bump
into anything while calibrating.