Viking Designer Ruby, Руководство пользователя

Страница: 20 / 116

2:2
OFF
ON
3 1 2
UNPACKING
1. Place the box on a steady, Á at surface. Lift off the
machine carrying case. Lift your machine out of the
box and remove the outer packaging.
2. Remove all other packing material and the plastic bag.
CONNECT THE POWER CORD AND FOOT
CONTROL
Among the accessories you will À nd the power cord and
the foot control.
Note: Before plugging in the foot control, check to ensure that it is type
“FR5” (see underside of foot control).
1. Pull out the cord from the foot control. Connect the
foot control cord to the front socket on the bottom
right side of the machine (1).
2. Connect the power cord to the rear socket on the
bottom right side of the machine (2).
3. Press the ON/OFF switch to ON to turn on power
and light (3).
For the USA and Canada
This sewing machine has a polarized plug (one blade wider
than the other). To reduce the risk of electric shock, this
plug is intended to
À t in a polarized outlet only one way. If
the plug does not À t fully in the outlet, reverse the plug. If
it still does not À t, contact a quali À ed electrician to install
the proper outlet. Do not modify the plug in any way.
PACK AWAY AFTER SEWING
1. Press the ON/OFF (3) switch to OFF.
2. Unplug the cord from the wall socket and then from
the machine (2).
3. Unplug the foot control cord from the machine (1).
Pull the cord gently and release. The cord will retract
itself into the foot control.
4. Place all accessories in the accessory tray. Slide the tray
on to the machine, behind the free arm.
5. Place the foot control in the space above the free arm.
6. Place the hard cover over your machine.