Viking Designer Ruby, Руководство пользователя

Страница: 42 / 116

3:12
SELECTIVE THREAD CUTTER
Sewing Mode
Touch the Selective Thread Cutter button and your machine
cuts the top and bobbin threads, raises the presser foot and
the needle, and activates the FIX function for the next start.
To cut threads at the end of a stitch or stitch program, touch
Selective Thread Cutter while sewing. The button starts to
Á ash, indicating that a cut is requested. When the stitch or
stitch program is completed, the upper thread and bobbin
thread will be cut. The Selective Thread Cutter function can
be programmed, see Program chapter.
Note: Your machine cuts the threads automatically after certain
stitches such as completing a Sensor One Step Buttonhole. Automatic
Selective Thread Cutter can be cancelled in the SET Menu, see page
3:6.
Embroidery Stitch-Out
The Selective Thread Cutter automatically cuts the threads
and raises the presser foot. At the end of a color block the
top thread only is cut. When the design is
À nished, both
top and bobbin threads are cut automatically.
NEEDLE STOP UP/DOWN ( TRIM POSITION)
Sewing Mode
Touch the Needle Stop Up/Down to move the needle up
or down. The set ting of the needle stop po si tion is changed
at the same time. This function will also set the needle
position up or down when you stop sewing. You can also
tap the foot control to raise or lower needle once you stop
sewing.
Embroidery Stitch-Out
The machine will move the hoop forward, towards you, for
easy thread trimming.
START/STOP
Touch this button to start and stop the machine sewing
or embroidering without using the foot control. Touch
START/STOP to begin and touch again to stop.
EXCLUSIVE SENSOR SYSTEM™
Thanks to the EXCLUSIVE SENSOR SYSTEM™ feature,
the presser foot continuously senses the thickness of fabric,
embroidery or stitching and sews over it smoothly and
evenly with perfect fabric feed.
Go to the SET Menu, Sewing Settings, to see the actual
setting of the Sensor pres ser foot pressure for the selected
fabric and adjust the presser foot pressure.
SENSOR FOOT UP AND EXTRA LIFT
Sewing Mode
Touch Sensor Foot Up to raise the pres ser foot. Touch it
a second time and the pres ser foot will raise to Ex tra Lift,
and the feed teeth are lowered automatically to make it easy
to get thick fabric under the pres ser foot.
Embroidery Mode
Touch the Sensor Foot Up and Extra Lift to lift the presser
foot to Up position. Touch once more and the presser foot
will raise to Extra Lift, to make it easier to insert or remove
the hoop.
SENSOR FOOT DOWN AND PIVOT
The presser foot is lowered automatically when you start
sewing/embroidering.
Sewing Mode
Touch the Sensor Foot Down and Pivot button and the
pres ser foot will be completely lowered. The machine
À rmly holds the fabric. Touch Sensor Foot Down again to
get the Pivot position.
Embroidery Mode
Touch Sensor Foot Down to lower the presser foot into the
Embroidery “
Á oat” position.
Sensor Foot Up and Extra Lift
Needle Stop Up/Down
(Trim Position)
Speed - and +
STOP
(Monochrome)
FIX
(Baste)
Reverse
Start/Stop
Selective Thread Cutter
Sensor Foot Down and Pivot