Viking Designer Ruby, Руководство пользователя

Страница: 107 / 116

M
AINTENANCE
10:3
General Problems
Bobbin alarm does not work? Clean lint from bobbin area and use only the original HUSQVARNA
VIKING® bobbins approved for this model.
Thread cutter does not cut the thread? Remove needle plate and clean lint from bobbin area.
Enable automatic thread cutter in the SET Menu.
Fabric does not feed? Make sure that machine is not set in Free-Motion mode.
Wrong stitch, irregular or narrow stitch? Deactivate Twin Needle or Stitch Width Safety Sewing Settings in the SET Menu.
The needle breaks? Insert needle correctly as described in chapter 2.
The machine will not sew? Check that all plugs are securely plugged into the machine and into the wall socket.
The screen displays the startup screen? Touch the screen to activate.
Turn off Screen Saver in the SET Menu.
Icons on the screen are not activated when touched? Calibrate the screen. Calibrate is found in the SET Menu.
The sewing and embroidery machine screen
and/or function buttons do not respond to
touch? The sockets and function buttons on the machine can be sensitive to static
electricity. If the screen does not respond to touch, turn the machine
OFF and then ON again. If the problem persists, contact your authorized
HUSQVARNA VIKING® dealer.
Needle Thread Breaks
Did you insert the needle properly? Insert needle correctly as described in chapter 2.
Did you insert a wrong needle? Use needle system 130/705 H.
Is the needle bent or blunt? Insert a new needle.
Is the needle too small for the thread? Change the needle to the proper size for the thread.
Is the needle plate hole damaged? Change the needle plate.
Did you thread the machine properly? Check how the machine is threaded.
Are you using poor thread with slubs or
thread which has become dry? Change to a new high quality thread purchased from an authorized
HUSQVARNA VIKING® dealer.
Is a correct spool cap used? Attach a spool cap of the right size for the actual thread spool (see chapter 2).
Is the best spool pin position used? Try a different spool pin position (vertical or horizontal).
Bobbin Thread Breaks
Did you insert the bobbin properly? Check the bobbin thread.
Is the needle plate hole damaged? Change the needle plate.
Is the bobbin area full of lint? Clean lint from bobbin area and use only the original bobbins approved
for this model.
Is the bobbin wound correctly? Wind a new bobbin.
TROUBLESHOOTING
In this troubleshooting guide you will À nd solutions to the problems you may have with your machine. For further
information please contact your local authorized HUSQVARNA VIKING® dealer who will be happy to help you.
Have Your Sewing Machine Serviced Regularly by your Local Authorized Dealer!
If you have followed this troubleshooting information and still have problems, take your sewing machine to your dealer.
If there is a speci
À c problem, it is a great help to test sew with your thread on a scrap of your sewing fabric and bring it to
your dealer. A sewing sample will often give much better information than words.