background image

 

Important Information

 

 

©2007 Viking Preferred Service  

 

Freestanding Bottom Mount/French Door Bottom Mount 

Refrigerator/Freezer Warranty 

TWO YEAR FULL WARRANTY 

Freestanding refrigerators/freezers and all of their components and accessories, except as detailed below*, are warranted to be free from 
defects in material or workmanship under normal household use for a period of two (2) years from the date of original retail purchase. Viking 
Range Corporation, warrantor, agrees to repair or replace, at its option, any part which fails or is found to be defective during the warranty 
period *Painted and decorative items are warranted to free from defective materials or workmanship for a period of ninety (90) days from the 
date of original retail purchase. ANY DEFECTS MUST BE REPORTED TO THE SELLING DEALER WITHIN NINETY (90) DAYS FROM 
DATE OF ORIGINAL RETAIL PURCHASE. 

SIX YEAR FULL WARRANTY 

Any sealed refrigeration system component, as listed below, or any automatic ice maker is warranted to be free from defective materials or 
workmanship in normal household use during the third through the sixth year from the date of original retail purchase. Viking Range 
Corporation, warrantor, agrees to repair or replace, at its option, any part which fails or is found to be defective during the warranty period. 

Sealed Refrigeration System Components: 

Compressor, Evaporator, Condenser, Connecting Tubing, Dryer/Strainer 

TWELVE YEAR LIMITED WARRANTY 

Any sealed refrigeration system component, as listed above, which fails due to defective materials or workmanship in normal household use 
during the seventh through the twelfth year from the date of original retail purchase will be repaired or replaced, free of charge for the part 
itself, with the owner paying all other costs, including labor. 

NINETY (90) DAY RESIDENTIAL PLUS WARRANTY

 This warranty applies to applications where use of the product extends beyond 

normal residential use. Examples are, but not limited to, bed and breakfasts, fire stations, private clubs, churches, etc. This warranty 
excludes all commercial locations such as restaurants, food service locations and institutional food service locations. 

This warranty extends to the original purchaser of the product warranted hereunder and to each transferee owner of the product during the 
term of the warranty. 

This warranty shall apply to products purchased and located in the United States and Canada. Products must be purchased in the country 
where service is requested. Warranty labor shall be performed by an authorized Viking Range Corporation service agency or representative. 
Warranty shall not apply to damage resulting from abuse, accident, natural disaster, loss of electrical power to the product for any reason, 
alteration, improper installation, improper operation or repair or service to the product by anyone other than an authorized Viking Range 
Corporation service agency or representative. Warranty shall not apply to damage resulting from indoor units being used in outdoor 
situations. This warranty does not apply to commercial usage. This warranty does not cover any food or medicine loss due to product failure. 
Warrantor is not responsible for consequential or incidental damage whether arising out of breach of warranty, breach of contract, or 
otherwise. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or 
exclusion may not apply to you. 

Owner shall be responsible for proper installation, providing normal care and maintenance, providing proof of purchase upon request, and 
making the appliance reasonably accessible for service. If the product or one of its component parts contains a defect or malfunction during 
the warranty period, after a reasonable number of attempts by the warrantor to remedy the defects or malfunctions, the owner is entitled to 
either a refund or replacement of the product or its component part or parts. Replacement of a component part includes its free installation. 
Warrantor’s liability on any claim of any kind, with respect to the goods or services covered hereunder, shall in no case exceed the price of 
the goods or service or part there of which gives rise to the claim. 

WARRANTY SERVICE

: Under the terms of this warranty, service must be performed by a factory authorized Viking Range Corporation 

service agent or representative. Service will be provided during normal business hours, and labor performed at overtime or premium rates 
shall not be covered by this warranty. To obtain warranty service, contact the dealer from whom the product was purchased, an authorized 
Viking Range Corporation service agent, or Viking Range Corporation. Provide model and serial number and date of original purchase. For 
the name of your nearest authorized Viking Range Corporation service agency, call the dealer from whom the product was purchased or 
Viking Range Corporation

. IMPORTANT

: Retain proof of original purchase to establish warranty period. 

The return of the Owner Registration Card is not a condition of warranty coverage. You, however, should return the Owner 
Registration Card so that Viking Range Corporation can contact you should any question of safety arise which could affect 
you. 

Any implied warranties of merchantability and fitness applicable to the above described refrigerator are limited in duration to 
the period of coverage of the applicable express written limited warranties set forth above. Some jurisdictions do not allow 
limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you 
specific rights, and you may also have other rights which may vary from jurisdiction to jurisdiction.

 

Specifications are subject to change without notice. 

For more product information, call 1-888-VIKING1 (845-4641), or visit our web  

site at http://www.vikingrange.com 

Содержание DDBF036LSS



















































Отзывы: