Viessmann VITOCAL 300, Инструкция по установке и обслуживанию

Страница: 104 / 160

Access
& " System settings "
& " Program "
& " Heating circuit "
& " Heating circuit 1/2 "
& "min. flow temp." (
1
/
!
)
Standard setting 10 °C
Setting range 1 to 30 °C
DHW during party mode
This setting determines whether,
when party mode has been enabled
(see operating instructions
Vitocal 300), the DHW cylinder should
be heated up first (setting "
Yes ") or
whether the system should immedi-
ately switch over to heating mode
(setting "
No ").
Access
& " System settings "
& " Program "
& " Heating circuit "
& " Heating circuit 1/2 "
& "Hot water with Party"
(" YES "/" NO ")
Standard setting YES
Setting range YES/NO
Excess reaction
Coordination of the heat drawn off in
the secondary circuit when the heat
pump produces an excess of heat or
the heat drawn by the secondary cir-
cuit is suddenly choked off.
Settings:
0 No heat drawn off
1 Heat will be drawn off only in case of a critical excess, i.e. if critical tem-
peratures were reached in the heat pump circuit or the minimum heat
pump runtime has not yet been reached
2 Heat will be drawn off, even if the excess heat being created is not critical
for the heat pump
Access
&
" System settings "
&
" Program "
&
" Heating circuit "
Minimum flow temperature
(cont.)
104
Heating circuit control settings
55
92
901
GB