VideoRay SeeByte Reacquire and Identify CoPilot, Руководство оператора

Страница: 35 / 39

13. Slowly rotate the ROV so that it passes through all orientations. The easiest way to do this is to think of the dome as a pain
brush and you are painting the inside of a sphere. Start with the ROV facing straight down. Lift the ROV in an arc until it faces
straight up. Rotate 15 degrees. Lower the ROV to face straight down again. Rotate 15 degrees and repeat this process of up
and down arcs until you have rotated a full circle.
14. Continue until the measurements have been completed and "Write Parameters to Chip" button appears.
15. Click on Write Parameters to Chip button.
16. Close the Vector Nav Sensor Explorer.
17. Expand the Engine Room.
18. Select None in the Port selection of the Compass Settings Window.
19. Close the Compass Settings window.
20. Close the Engine Room.