Videonics MXPro DV, Руководство пользователя

Страница: 74 / 198

MXP
RO
DV U
SER
G
UIDE
C
HAPTER
5 66
C
HANGING
U
SER
T
RANSITIONS
M
ENU
The first time you power up MXProDV and press the
USER
Transitions Category
button, the default transitions appear in the menu. The default set contains a variety
of transitions from the other four categories, as defined by Videonics at the factory. If
you are satisfied with the default set, there is no need to change them.
The
USER
category does not contain distinct transitions – that is, all transitions in the
USER
category actually exist in other categories (basic, edges, trailing, and shape).
Think of the
USER
category as a collection of references to other transitions.
You can change as many transitions in the
USER
menu as you want.
To change a transition in the User menu:
1 Decide which transition you want to add to the
USER
category. Refer to Appendix A,
Transitions List, for a list of valid numbers and their associated transitions.
2 If necessary, press
DISPLAY
to set the Preview screen to Standard or Two Channel
mode.
In the other Preview modes (Full, Current, or Next), MXProDV does not display the
Transitions Menu. See “Display” beginning on page 87.
3 Press the
USER
Transition Category button to display the menu on the Preview screen.
4 Use the
ARROW
keys to highlight the transition you want to replace in the
USER
cate-
gory.
5 Enter the number of the transition you selected in step 1, above. You can enter the
number of any transition from any category.
6 Press
OK
.
Restoring Default
User Transitions
You can easily restore the default set of transitions in the User category.
To restore the default set of transition to the User menu:
1 If necessary, press the
USER
Transition Category button to display that menu on the
Preview screen.
2 Enter
SHIFT
+0 (zero). This restores the default set of transitions for this category.