Videonics MXPro DV, Руководство пользователя

Страница: 190 / 198

MXP
RO
DV U
SER
G
UIDE
A
PPENDIX
E 182
Default Routing Changed / No Auto Detect
The default routing has changed for MXProDV:
• DV IN 1’s video and audio (channels 1 and 2) are routed to channel A.
• DV IN 2’s video and audio (channels 1 and 2) are routed to channel B.
• Video IN (Y/C) 3’s video and analog Audio IN 1 are routed to channel C.
• Video IN (Y/C) 4’s video and analog Audio IN 2 are routed to channel D.
• No audio is routed to the Color channel (mute selected).
• IN 4’s analog audio is routed to the Background audio channel.
There is no automatic source detection in MXProDV as there was in MX-1. If your
sources are not attached in the same locations as the defaults, you will need to use
the Route menu to redirect your inputs. Note, however, that with MXProDV the
route settings are saved in non-volatile memory so your routing information is saved
even after power is cycled.
Setup Menu Differences
MX-1 Setup functions are found on the MXProDV Route screen. The MXProDV
Setup menu corresponds to the MX-1 Advanced Setup screen.
For MXPro users, there is only one difference in Setup:
2-channel Audio Output Parameter Added —This parameter determines whether
audio output will be 4-channel (two stereo pairs) or 2-channel (one stereo pair). The
default is 4-channel. The setting for this parameter affects several other settings and
functions. See “2/4-Channel Audio Output” beginning on page 90.
For MX-1 users, the following additional changes have been made:
Frame/Field Freeze Added – See “Force Field Freeze” on page 90 and “Major Freeze
Functions” on page 97.
GPI Mode Added – See “GPI Out Mode” on page 90 and “Using a GPI Device” on
page 152 for further information.
Comb Filter Added – See “Comb Filter” on page 90.
Frame Rate Lock and Noise Filter – Removed
Headphone Control Moved – Controls for adjusting headphones are in the Audio
Mix screen. See “Using the Audio Mixer” on page 141 and “Using Headphones” on
page 144.
1 0 1 0 1
DV