Cameras
Displayed
.
entered a number
the maximum’
number of cameras. Refer to the appropriate manual.
you’ve tried to start a sequence for a 1300 Series
control system before selecting a camera. See page
Sequence Pattern
33 for the
procedure.
you’ve placed a camera in a sequence. Refer to
Cameras in Sequence Pattern”
for more details.
you’ve placed all cameras in a sequence. Refer to
. .
.
“Out’of Sequence Pattern!”
page 33 for more details.
you’ve removed a camera from a sequence. Refer to
“All Cameras Out of Sequence’ Pattern”
you’ve removed all cameras from a sequence. Refer
in Progress!”
to page 33 for more details.
a tour, has been loaded and running
Miscellaneous
.
. .
“Invalid Key Press!”
you’ve pressed a key that does not correspond to an
Keypad Shut Off
expected keystroke sequence.
the control system has disabled your
console.
“READY”
system console is ready for
“NOVA Operating Mode”
the system console is waiting for communication with
,
“SEIZE”
the currently selected camera has been seized by
another keypad.
Alarms and Communication Failures
“ALARM”
Message
Displayed when.. .
an alarm has been activated at the control system.
You may acknowledge the alarms as discussed on
page 37 for 1300 Series control systems or page 38
for 1400 Series control systems (for more complete
“Sequencing Alarms”
.
the control system’s manual).,,,
alarms are active and alarm video is sequencing. The
sequencing of alarm video is defined during control
system or multiplexer programming. Refer to the
appropriate instruction manual for details. You may
acknowledge the alarms as discussed on page 37 for
1300 Series control systems or page 38 for 1400
Series control systems (for more complete
refer to the control system’s
.
a communication failure (such as a disconnected
cable) has been received. You may acknowledge the
announcement of the failure as discussed on page
54 Reference
X923 Rev 1099 System Console
