Monitor
To select a monitor:
1 .
Enter the monitor number.
2 .
Then press the Monitor key.
Or:
Press the Monitor key.
2 .
Enter the monitor number.
3 .
Press the Monitor key again.
Camera
To select a camera:
Enter the camera number.
2 .
Press the Camera key.
To switch between the last two cameras selected:
1. Press the Camera key (without entering any numbers). The first press will take you to the previous
camera selected.
2 .
A second press of the Camera key will take you to the last camera selected.
Presets
To recall a preset:
1 .
Enter the preset number.
2 .
Press the Preset (PRE) key to recall a preset pan-and-tilt position (and lens setting, if applicable).
Note: Only managers can store
a
preset.
To store a preset:
Pan-and-tilt to the desired position (and adjust the lens setting, if applicable).
2 .
Then enter the preset number.
3. Hold the Shift
key down and press the Preset key.
X923 Rev 1099 System Console
Operation: 1300 & 1400 Series 33
