Electronic Pan, Tilt, Zoom
To activate the electronic pan, tilt, and zoom function:
Enter the camera number.
2 .
Press the Camera key to select a camera in full screen format.
3 .
Zoom in using the
or
(this activates EPTZ).
4 .
Then zoom in, zoom out, pan and tilt in the scene using the
or
5 .
Press the Enter soft key to exit.
Programming
To access the
or AurorA programming menus:
1 .
Select the multipicture display monitor.
2 .
Then press the Menu or Format soft key.
3. You will use the Mode and Setup soft keys to make menu selections, as well as the
or
to move the cursor. To enter a number greater than 9, hold the Shift key down and press a
number key to add 10 to that number. For example, to enter
hold Shift down and press the 3 key.
Note that the Setup and Receiver Mode functions share a soft key. To switch between them, press the
Shift
key. Refer to
Manual X873 for programming instructions.
4 .
After you exit the
or AurorA menu system, you must press the Monitor key to return to normal
(non-programming) operation.
Note: To enter a number greater than 9 while in the programming menus, hold the Shift key down and press a
number key to add
to that number, For example, to enter
hold Shift down and press the 3 key.
To define
a
size for a PIP window, you would use the Zoom In and Zoom Out keys from the multiplexer
front panel. From the system console, hold down the top, leftmost soft key (the PIP soft key) and zoom
in or out using the
Joystick Keypad or
Desktop Joystick.
Receiver Mode
Note: The AurorA (an earlier version of the
does not have a receiver mode.
To enter receiver mode:
1
If the Setup label is visible, press the Shift
key to display
Mode”.
2 .
Refer to
Manual
X873 to operate the
in receiver mode.
Help
To access help on the current screen:
1 .
Press the ? key to display the first page of on-line help for the currently viewed screen.
2 .
Press the ? key again to view the next help page (if applicable) or any other key to exit the on-line help
44
l
Operation:
X923 Rev 1099 System Console
