Monitor Selection
To select a monitor:
1 .
Enter “1” for the multipicture display monitor (digital video output) or
for the video switcher monitor
(analog video output).
2 .
Then press the Monitor key.
Or:
1 .
Press the Monitor key.
2 .
Enter the monitor number
or “2”).
3 .
Then press the Monitor key again.
Joystick Control
To define joystick control:
Press the joystick control soft key to toggle settings. Joystick control settings are NOVA, selected if you need
to keep control of receivers that you were using in the
Control Screen, or
for menu
navigation, receiver mode or electronic pan/tilt/zoom control.
Full Screen Display
To select full screen display:
1 .
Enter the camera number.
2 .
Then press the Camera key.
To switch between the last two cameras selected:
1. Press the Camera key (without entering any numbers). The first press will take you to the previous
camera selected.
2 .
A second press of the Camera key will take you to the last camera selected.
Passcodes
If you have
passcodes enabled, the
entry screen will display on the multipicture
display monitor connected to the
when you press the system console’s Format soft key. You
may enter the
from the system console. Note that this is the multiplexer
and does not
refer to the system console
discussed in previous sections of this manual.
X923 Rev 1099 System Console
Operation:
l
41
