VET-PRO
Operator’s Manual
30
Time setting options:
A.setting 4 digits: 2 first digits will represent hours and the other 2 will
represent minutes
B.setting 2 digits for full hours
C.setting 1 digit for hours and using the digital point to set minutes.
D.using the digital point to set only minutes.
.
During program operation, the pump
will display the rate in which program
is operating.
Rate
250 ml/h
Note
:
-If one of the values is changed during the programming
mode, the pump will not recall the new value, unless changes
are confirmed by pressing the
START/OK
key.
-If the flush key is activated during data setting, the pump
will return to the original (previous) screen, once flushing is
completed.
25 Steps Protocol
In the 25 steps program, the user can set up to twenty-five different
steps.Each step has its own rate and volume.The steps accumulation is
limited to a Volume of 10 liters. Protocol steps are delivered one after
another, sequentially, until all steps are completed.
Switch the pump ON using the
ON/OFF
key.
25 - Steps
PROGRAM
S
T
E
P
Press NO to change
25 - Steps
Pump displays program name and status. The
status is either "Lock out" or "program".
(locking and unlocking the pump – see page
50).
S
T
E
P
LOCK OUT