Vertiv | Liebert CRV CCD10 Condenser | User Manual
20
Mechanical Installation
•
The wires should be connected in accordance with the local regulations.
•
The power supply of the equipment should be installed by professional personnel on site. If the power supply
wires are damaged, to avoid risk, they must be replaced by the professional personnel from the manufacturer,
maintenance department or similar department of the manufacturer.
The specifications of the power supply wires of the outdoor unit is (L+N+PE or L1+L2+G), the recommended wire
diameter is no less than 16AWG(1.5mm2). Connect one end of the power supply cables from the accessories to the
power output terminals of the indoor unit as shown in Figure 2-7, and connect the other end to the power terminals of
the condenser as shown in Figure 2-8 or Figure 2-9.
Figure 2-7 Power Output Terminals of the Indoor Unit, CRD10
Outdoor Breaker
