Vertiv | Liebert CRV CCD10 Condenser | User Manual
11
Mechanical Installation
Chapter 2: Mechanical Installation
NOTICE!
The CCD10 outdoor unit is used with the CRD10 indoor unit, and the
CRD10 Air Conditioner User Manual must
be read simultaneously when the outdoor unit is installed and used.
This chapter introduces the moving, unpacking, inspection, installation notes, space requirements and installation
procedures.
2.1
Moving, Unpacking and Inspection
WARNING! Risk of improper moving. Can cause serious injury or death. Building and equipment damage may
also result. Use only lifting equipment that is rated for the unit weight by an OSHA-certified rating
organization. The center of gravity varies depending on the unit size and selected options. The slings must be
equally spaced on either side of the center of gravity indicator. Use the center of gravity indicators on the unit
to determine the position of the slings.
CAUTION: Risk of contact with sharp edges, splinters, and exposed fasteners. Can cause injury. Only properly
trained and qualified personnel wearing appropriate, OSHA-approved PPE should attempt to move, lift, or
remove packaging from the unit in preparation for unit installation.
NOTICE!
Risk of improper lifting. Can cause equipment damage. Make sure that the spreader bars are wider than the
unit. If the spreader bars are too short, the slings may crush the unit.
NOTICE!
Risk of doorway/hallway interference. Can cause unit and/or structure damage. The unit may be too large to
fit through a doorway or hallway while on the skid. Measure the unit and passageway dimensions
,
and refer
to the installation plans prior to moving the unit to verify clearances.
NOTICE!
Risk of improper storage. Keep the unit upright, indoors and protected from dampness, freezing temperatures
and contact damage.
