FT-2000
Operating Manual
Vertex Standard Co., Ltd.
25
button.
FLT (VRF, µ-TUNE, THRU):
Indicates the RF filter selected for operation by the front panel [VRF] button.
Advice:
The µ-TUNE filter is option. “µ-TUNE” icon does not appear when the optional
µ-TUNE unit is not connected.
IPO (AMP 1, AMP 2, ON):
Indicates the front end RF amplifier selected for operation by the front panel [IPO]
button.
AGC (AUTO, FAST, MID, SLOW):
Indicates the AGC decay time selected for Main band (VFO-A) operation by the
front panel [AGC] switch.
2. DNR
This indicator appears whenever the Digital Noise Reduction is activated.
3. DNF
This indicator appears whenever the Digital Noise Filter is activated.
4. CONTOUR
Appears the graphically depict the peak position of the CONTOUR Filter when the
CONTOUR Filter is activated.
5. NOTCH
Appears the graphically depict the peak position of the IF Notch Filter when the IF
Notch Filter is activated.
6. WIDTH
Indicates the bandwidth of the DSP IF filter.
7. SHIFT
Indicates the peak position of the DSP IF filter.
8. NB
This indicator appears when the Main band (VFO-A) receiver’s (short duration) Noise
Blanker is activated.