FT-2000
Operating Manual
Vertex Standard Co., Ltd.
72
Voice Memory Operation from the optional FH-2 Remote Control Keypad
You may also utilize the Voice Memory capability of the FT-2000 from the optional
FH-2 Remote Control Keypad which plugging into the rear panel’s REM jack.
When using the FH-2 Remote Control Keypad, you may records the five memories
capable of storing up to 20 seconds of voice audio each.
Recording Your Own Voice in Memory
Select the LSB, USB, AM, or FM mode using the front panel [MODE] selector
buttons.
Press the [MEM] key on the FH-2.
Press any of the FH-2’s keys numbered [1] through [5] to select that memory
storage register. If you do not press the PTT key (see next step) within five seconds,
the memory storage process will be cancelled.
Press the microphone’s PTT switch, and speak into the microphone in a normal
voice level to record the message (such as “CQ DX, CQ DX, this is W 6 Delta X-Ray
Charlie, W 6 Delta X-Ray Charlie, Over”). Remember that the time limit for
recording any message is 20 seconds.
Press the FH-2’s [MEM] key to terminate the message storage process.
Checking Your Recording
Be sure that the front panel [MOX] button is Off (The LED imbedded in the button
is turned off).
Press the FH-2’s [1] ~ [5] key (whichever one you just recorded in), and you will
hear the contents of the voice memory you just recorded.
Advice: You may rotate the [AF GAIN] knob to adjust the playback level of the
recording.
Transmitting the Recorded Message
Select the LSB, USB, AM, or FM mode using the front panel [MODE] selector
buttons.
Press the front panel’s [VOX] button.
Press the FH-2’s [1] ~ [5] key, depending on which memory register’s message you
wish to transmit. If you hit the key again during playback, the message will be
terminated.
