FT-2000
Operating Manual
Vertex Standard Co., Ltd.
86
Now we will utilize another powerful feature of the CW Memory Keyer.
Example 2: 599 10 200 # K} (15 characters)
Storing a Message into Memory
Press the [MENU] button to enter the Menu mode.
Rotate the Main Tuning Dial knob to select the CW Memory Register into which
you wish to store the message; for now, we are just selecting the message entry
technique (Keyer entry).
020 tEy CW MEM1
021 tEy CW MEM2
022 tEy CW MEM3
023 tEy CW MEM4
024 tEy CW MEM5
Rotate the [SUB VFO-B] knob to set the selected Memory Register to “tyP1.” If you
want to text message entry on all memories, set all five Menu items (#020 ~ 024)
to “tyP1.”
Press and hold in the [MENU] button to save the new settings and exit.
Text Message Programming
1. Press the [CW] mode button to set the operating mode to CW.
2. Be sure that Break-in is Off by pressing the [BK-IN] button, if necessary.
3. Press the [F5(MEM)] button on the front panel.
4. Press the [F1(CH-1)] ~ [F4(CH-4)] button to select the desired Message Memory
Register into which you wish to program the text.
5. Use the Main Tuning Dial knob to set the cursor position and use the [Sub VFO-B]
to choose the letter/number to be programmed in each slot of the memory. In the
case of the second example above, the “#” character designates the slot where the
Contest Number will appear.
6. Press the [F5(MEM)] button again once all characters have been programmed.
Deleting Previously-stored Characters
Use the Main Tuning Dial knob to select the last correct letter in the message. Now
rotate the [SUB VFO-B] knob to select the “}” character; everything after the “}”
character will be deleted.
Checking the CW Memory Contents
