FT-2000
Operating Manual
Vertex Standard Co., Ltd.
70
1. Connect the microphone to the MIC jack.
2. Set the [RF PWR] knob to its minimum value, so as not to cause interference to
other users during adjustment.
Advice:
We recommend you consider connecting a dummy load to one of the Antenna
jacks, and monitor your signal on a separate receiver, so as to prevent
interference to other users.
You will have the best chance of hearing the effects of adjustments if you wear
headphones while monitoring your transmitted signal.
1. Press the [MONI] button.
2. Press the [MENU] button momentarily. The Menu list will appear in the display.
3. Rotate the Main Tuning Dial knob to find the “EQ” Menu area, containing Menu
items “122” through “130;” these parameter to the adjustment of the Parametric
Microphone Equalizer.
4. Rotate the [SUB VFO-B] knob to perform adjustments to a particular Menu item.
5. Close the PTT switch, and speak into the microphone while listening to the effects
of the changes you are making (in step 6). Because the overall effect on the sound
will change with each adjustment you make, you should make several passes
through each adjustment area, to be sure that you are achieving the optimum
setting.
6. When you have completed all adjustments, press and hold in the [MENU] button
for two seconds to save the new settings and exit to normal operation. If you only
press the [MENU] button momentarily to exit, any changes you performed will not
be stored.
3-Stage Parametric Equalizer Adjustments
Center Frequency
“122 tAUd EQ1-FREQ” “100” (Hz) ~ “700” (Hz)
“125 tAUd EQ2-FREQ” “700” (Hz) ~ “1500” (Hz)
“128 tAUd EQ3-FREQ” “1500” (Hz) ~ “3200” (Hz)
Parametric Gain
“123 AUd EQ1-LVL”
“–10” (†10dB) ~ “+10” (+10dB)
“126 tAUd EQ2-LVL”
“–10” (†10dB) ~ “+10” (+10dB)
“129 tAUd EQ3-LVL”
“–10” (†10dB) ~ “+10” (+10dB)
Q (Bandwidth)
