FT-2000
Operating Manual
Vertex Standard Co., Ltd.
123
101 rdSP SSB SHP
Function: Selects the passband characteristics of the DSP filter for the SSB mode.
Available Values: SOFt/ShAP
Default Setting: ShAP
SOFt (SOFT):
Primary importance attached to amplitude of the filter factor.
ShAP (SHARP): Primary importance attached to phase of the filter factor.
102 rdSP SSB SLP
Function: Selects the shape factor of the DSP filter for the SSB mode.
Available Values: StP(STEEP)/nEd(MEDIUM)/GEnt(GENTLE)
Default Setting: nEd (MEDIUM)
103 rdSP SSB NAR
Function: Selects the passband of the DSP filter for the “Narrow” SSB mode.
Available Values: 200/400/600/850/1100/1350/1500/1650/1800/1950/2100/2250 Hz
Default Setting: 1800 Hz
SCOPE Group
Advice: This group’s adjustment has no effect, if the optional DMU-2000 Data
Management Unit is not connected.
104 SCP 1.8 FI
Function: Selects the scan start frequency of the FIX mode Spectrum Scope while
monitoring on the 160 m amateur band.
Available Values: 1.700 - 1.999 MHz (1 kHz steps)
Default Setting: 1.800 MHz
105 SCP 3.5 FI
Function: Selects the scan start frequency of the FIX mode Spectrum Scope while
monitoring on the 80 m amateur band.
Available Values: 3.400 - 3.999 MHz (1 kHz steps)
Default Setting: 3.500 MHz
106 SCP 5.2 FI
Function: Selects the scan start frequency of the FIX mode Spectrum Scope while