FT-2000
Operating Manual
Vertex Standard Co., Ltd.
114
rEU:
Tip = Dash, Ring = Dot, Shaft = Ground
053 A1A R-TYPE
Function: Select the desired keyer operation mode for the device connected to the rear
panel’s KEY jack.
Available Values: OFF/buG/ELE/ACS
Default Setting: ELE
OFF: Disables the front panel’s keyer (“straight key” mode for use with external
keyer or computer-driven keying interface).
buG: Mechanical “bug” keyer emulation. One paddle produces “dits” automatically,
while the other paddle manually produces “dahs.”
ELE: Iambic keyer with ACS (Automatic Character Spacing) disabled.
ACS: Iambic keyer with ACS (Automatic Character Spacing) enabled.
054 A1A R-REV
Function: Selects the keyer paddle’s wiring configuration of the KEY jack on the rear
panel.
Available Values: nor/rEU
Default Setting: nor
nor:
Tip = Dot, Ring = Dash, Shaft = Ground
rEU:
Tip = Dash, Ring = Dot, Shaft = Ground
055 A1A CW AUTO
Function: Enables/disables CW keying while operating on SSB.
Available Values: OFF/50/On
Default Setting: OFF
OFF:
Disables CW keying while operating on SSB.
50:
Enables CW keying only while operating SSB on 50 MHz (but not HF).
On:
Enables CW keying while operating on SSB (all TX bands).
Note: This feature allows you to move someone from SSB to CW without having to
change modes on the front panel.
056 A1A BFO
Function: Sets the CW carrier oscillator injection side for the CW mode.
Available Values: USb/LSb/Auto
Default Setting: USb