Versitron Web Smart+ SG71070M Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 123

Versitron Web Smart+ SG71070M Скачать руководство пользователя страница 62

56

SG71070M

Revision A3

2-11 Private VLANS

In a private VLAN, communication between ports in that private VLAN is not permitted. A
VLAN can be configured as a private VLAN.

2-11.1 VLAN Membership

The VLAN membership configuration for the selected stack switch unit switch can be
monitored and modified here. Up to 4096 VLANS are supported. This page allows for adding
and deleting VLANS as well as adding and deleting port members of each VLAN.

Web Interface

To configure Private VLAN Membership Configuration in the web interface:

1.

Click VLAN membership Configuration.

2.

Specify Management VLAN ID. 0~ 4094.

3.

Click Apply.

Figure 2-11.1: The Private VLAN Membership Configuration

Parameter description:



Delete

To delete a private VLAN entry, check this box. The entry will be deleted during the next save.



PVLAN ID

Indicates the ID of this particular private VLAN

.



Port Members

A row of check boxes for each port is displayed for each VLAN ID. To include a port in a
VLAN, check the box. To remove or exclude the port from the VLAN, make sure the box is
unchecked. By default, no ports are members, and all boxes are unchecked.



Add

Click to add a new VLAN ID. An empty row is added to the table, and the VLAN can be
configured as needed. Legal values for a VLAN ID are 1 through 4095.

The VLAN is enabled on the selected stack switch unit when you click on "Save". The VLAN is
thereafter present on the other stack switch units, but with no port members. The check box
is greyed out when VLAN is displayed on other stacked switches, but user can add member
ports to it.

A VLAN without any port members on any stack unit will be deleted when you click "Save".

The button can be used to undo the addition of new VLANS.



Buttons

Apply – Click to save changes.

«
...
60
61
62
63
64
...
»

Содержание Web Smart+ SG71070M




























































































































Отзывы:

Нет отзывов