37
SG71070M
Revision A3
“Yes” causes the Port not to propagate received topology change notifications and topology
changes to other Ports. This parameter is “No” by default. If set it can cause temporary loss
of connectivity after changes in a spanning trees active topology as a result of persistent
incorrectly learned station location information. It is set by a network administrator to
prevent bridges external to a core region of the network, causing address flushing in that
region, possibly because those bridges are not under the full control of the administrator. Or
the status of MAC operation for the attached LANs transitions frequently.
M check
The same definition as in the RSTP specification for the CIST ports.
MSTP State
MSTP protocol is Enable or Disable.
Force Version
It shows the current spanning tree protocol version configured.
Bridge Max Age
It shows the Max Age setting of the bridge itself.
Bridge Forward Delay
It shows the Forward Delay setting of the bridge itself.
Bridge Max Hops:
It shows the Max Hops setting of the bridge itself.
Instance Priority
Spanning tree priority value for a specific tree instance (CIST or MSTI).
Bridge Mac Address
The Mac Address of the bridge itself.
CIST ROOT PRIORITY
Spanning tree priority value of the CIST root bridge
CIST ROOT MAC