29
SG71070M
Revision A3
2-5.2 Aggregator View
To display the current port trunking information from the aggregator point of view.
Web Interface
To configure the Aggregation view in the web interface:
1.
Click Configuration, Aggregation, and Aggregator View.
2.
Select Lacp Detail.
3.
Click the Lacp Detail.
Figure 2-5.2: The Aggregator View
Parameter description:
Aggregator
It shows the aggregator ID (from 1 to 10) of every port. In fact, every port is also an
aggregator, and its own aggregator ID is the same as its own Port No.
Method
Show the method a port uses to aggregate with other ports.
Member Ports
Show all member ports of an aggregator (port).
Ready Ports