Versitron Web Smart+ SG71070M Скачать руководство пользователя страница 24

Страница: 24 / 123

SG71070M

Revision A3

Parameter description:



Ingress Port

Indicates the ingress port of the ACE. Possible values are:

Any: The ACE will match any ingress port.

Policy: The ACE will match ingress ports with a specific policy.

Port: The ACE will match a specific ingress port.



Frame Type

Indicates the frame type of the ACE. Possible values are:

Any: The ACE will match any frame type.

EType: The ACE will match Ethernet Type frames. Note that an Ethernet Type based ACE will
not get matched by IP and ARP frames.

ARP: The ACE will match ARP/RARP frames.

IPv4: The ACE will match all IPv4 frames.

IPv4/ICMP: The ACE will match IPv4 frames with ICMP protocol.

IPv6: The ACE will match all IPv6 standard frames.



Action

Indicates the forwarding action of the ACE.

Permit: Frames matching the ACE may be forwarded and learned.

Deny: Frames matching the ACE are dropped.

Filter: Frames matching the ACE are filtered.



Metering

Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When Disabled is
displayed, the rate limiter operation is disabled.



Mirror

Specify the mirror operation of this port. The allowed values are:

Содержание Web Smart+ SG71070M




























































































































Результаты поиска

Содержание Web Smart+ SG71070M

Отзывы:

Versitron Web Smart+ SG71070M, Руководство пользователя, Страница: 24 / 123

Результаты поиска

Содержание Web Smart+ SG71070M

Отзывы: