16
SG71070M
Revision A3
ASCII characters from 32 to 126.
Password (again)
To type the password again. You must type the same password again in the field.
Privilege Level
The privilege level of the user. The allowed range is 1 to 15. If the privilege level value is 15, it
can access all groups, i.e. that is granted the fully control of the device. But other’s value
need to refer to each group privilege level. User's privilege should be same or greater than
the group privilege level to have the access of that group. By default, most group’s privilege
level is 5 and has the read-only access, and privilege level 10 has the read-write access. The
system maintenance (software upload, factory defaults and etc.) need user privilege level 15.
Generally, the privilege level 15 can be used for an administrator account, privilege level 10
for a standard user account, and privilege level 5 for a guest account.
Buttons
Apply – Click to save changes.
Reset - Click to undo any changes made locally and revert to previously saved values.
Cancel - Click to undo any changes made locally and return to the Users.
Delete User - Delete the current user. This button is not available for new configurations
(Add new user)