106
SG71070M
Revision A3
3-9.2 LLDP-MED Neighbor
This page provides an overview of all LLDP-MED neighbors. The displayed table contains a row
for each port on which an LLDP neighbor is detected. This function applies to VoIP devices
which support LLDP-MED. The columns hold the following information:
Web Interface
To show LLDP-MED Neighbor:
1.
Click Monitor, LLDP, LLDP-MED Neighbor.
2.
Click Refresh for manual update web screen.
3.
Click Auto-refresh for auto-update web screen.
Figure 3-9.2: The LLDP-MED Neighbors information
N
OTE
:
If your network is without any devices that support
LLDP-MED, then the table will show “No LLDP-MED neighbor
information found”.
Parameter description:
Port
The port on which the LLDP frame was received.
Device Type
LLDP-MED Devices are comprised of two primary Device Types: Network Connectivity
Devices and Endpoint Devices.
LLDP-MED Network Connectivity Device Definition
LLDP-MED Network Connectivity Devices, as defined in TIA-1057, provide access to the IEEE
802 based LAN infrastructure for LLDP-MED Endpoint Devices. An LLDP-MED Network
Connectivity Device is a LAN access device based on any of the following technologies:
1. LAN Switch/Router
2. IEEE 802.1 Bridge
3. IEEE 802.3 Repeater (included for historical reasons)
4. IEEE 802.11 Wireless Access Point
5. Any device that supports the IEEE 802.1AB and MED extensions defined by TIA-1057 and
can relay IEEE 802 frames via any method.
LLDP-MED Endpoint Device Definition :
LLDP-MED Endpoint Devices, as defined in TIA-1057, are located at the IEEE 802 LAN
network edge, and participate in IP communication service using the LLDP-MED framework.
Within the LLDP-MED Endpoint Device category, the LLDP-MED scheme is broken into