Versitron Web Smart+ SG71070M Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 123

Versitron Web Smart+ SG71070M Скачать руководство пользователя страница 48

42

SG71070M

Revision A3

will be adjusted automatically according to the selected profile entry.



Action

Indicates the learning action upon receiving the Join/Report frame that has the group
address matches the address range of the rule.
Permit: Group address matches the range specified in the rule will be learned.
Deny: Group address matches the range specified in the rule will be dropped.



Log

Indicates the logging preference upon receiving the Join/Report frame that has the group
address matches the address range of the rule.
Enable: Corresponding information of the group address, that matches the range specified
in the rule, will be logged.
Disable: Corresponding information of the group address, that matches the range specified
in the rule, will not be logged.



Buttons

Add Last Rule – Click to add a new rule in the end of the specific profile's rule list. Specify the
address entry and configure the new entry. Click "Commit".
Commit – Click to commit rule changes for the designated profile.
Reset – Click to undo any changes made locally and revert to previously saved values.

«
...
46
47
48
49
50
...
»

Содержание Web Smart+ SG71070M




























































































































Отзывы:

Нет отзывов