versa ag leader Скачать руководство пользователя

Страница: 150 / 304

136

Firmware Version 5.4

ANAGE

ETTINGS

Press: System button > Manage Settings button

The Manage Settings screen enables you to:

• Save or delete the current log files.

• Save the current database or import a database.

• Reset all the current settings to the default factory settings.

Log Files

The log files contain system data that can be used for diagnostic and troubleshooting purposes.

To copy log files:

1. Insert USB drive into display.

2. Press “Manage Settings” button.

3. Select Log Files.

4. Press “Copy to Display” button.

The log files are saved to the USB drive.

To delete log files:

1. Press the “Manage Settings” button.

2. Select Log Files.

3. Press “Delete” button.

4. Press checkmark button on the Delete Log Files confirmation prompt.

Log files are deleted.

System

Manage
Settings

Содержание ag leader

















































































































































































































































































































Результаты поиска

Содержание ag leader

Отзывы:

Похожие инструкции для ag leader

Бренды по названию

Популярные бренды

versa ag leader, Руководство оператора

Результаты поиска

Содержание ag leader

Отзывы:

Похожие инструкции для ag leader

Бренды по названию

Популярные бренды