Vermes MDS 3200+ Series, Руководство пользователя, Страница: 77 / 125

VTK-VS-BA-015e-A | User Manual MDS 3200+ Series
|
Communication Interfaces
77
68 SETUP:READ:<Setup No.>
Description: This command reads the parameters of a given setup. As value you have to
enter its number.
All values relating to time, except “Falling“, are given in 1/10 ms
(i.e. 10 ≙
1 ms)
. Falling is given in 1/100 ms
(i. e. 100 ≙ 1,00 ms)
.
Therefore the minimum falling value amounts to 0,01 ms
(10 % NL)
, the
minimum rising value is 0,1 ms
(30 % NL)
.
Example: Input: SETUP:READ:1
Result: Displays the parameters of the given setup.
Rising: 30
≙ 3,0 ms
(ms = Milliseconds)
Open Time: 10 ≙ 1,0 ms
Falling: 15 ≙ 0,15 ms
Needle Lift: 90 %
Number of Pulses: 20
Delay: 8
≙ 0,8 ms
Return:
30,10,15,90,20,8
69 SETUP:AREAD:<Setup No.>
Description: This command reads the parameters of a given setup. As value you have to
enter its number.
All values relating to time, except “Falling“ and “Rising”, are given in 1/10 ms
(i.e. 10 ≙ 1 ms)
. Falling and rising are given in 1/100 ms
(i. e. 100 ≙ 1,00 ms)
.
Therefore the minimum falling value amounts to 0,01 ms
(10 % NL)
, the
minimum rising value is 0,01 ms
(1 % NL)
.
Example: Input: SETUP:AREAD:1
Result: Displays the parameters of the given setup.
Rising: 30
≙ 0,3 ms
(ms = Milliseconds)
Open Time: 10
≙
1,0 ms
Falling: 15
≙
0,15 ms
Needle Lift: 90 %
Number of Pulses: 20
Delay: 8
≙
0,8 ms
Return:
30,10,15,90,20,8
70 BAUDRATE:0/1/2/3
Description: This command changes the baud rate of the serial interface. There are four
possible baud rates
(9600, 19200, 38400 and 57600)
, corresponding with
the parameters in this order (0, 1, 2 or 3) .
Important Note:
The sender has to switch his baud rate as well; otherwise the communica-
tion will break down.
Example: Input: BAUDRATE:1
Result: The baud rate is switched to 19200.
Return:
OK
71 GETTD (GETTD = Get time and date)
Description: This command tells you the current time
(UTC)
and date in the format
“hour, minute, second, year, month, day”.