Vermes MDS 3200+ Series, Руководство пользователя, Страница: 21 / 125

VTK-VS-BA-015e-A | User Manual MDS 3200+ Series
|
Product Description
21
4.1.5.1 Main Menu
When you switch ON the MDC, you always start in the “Main Menu“. The display shows “Ready”.
With [enter] or [arrow down] you can reach the submenus. For the information on the main level
use [arrow right] or [arrow left] . With [arrow up] you can find information about the frequency
and dispensing time
(DT)
of your scenarios or setups
(depending on if scenario is “ON” or “OFF”)
.
All levels are “wrap-around”, i.e. you can circle around between the items with both keys.
INFORMATION! (Display “Ready”)
On this level, the display jumps automatically back to “Ready”, if you do not press any button for
longer than about 10 sec. From the submenus, the display will jump back as well, if no buttons are
pressed, but the wait is a bit longer.
In the upper right corner an “A” or “F” is shown to indicate the mode of operation. Next to it a fre-
quency is added. This is the dispensing frequency resulting from your current parameter settings.
While “Scenario” is “ON”, the word “Scenario” is shown instead
(see 4.1.5)
. In the lower line a
maintenance bar is shown. If all eight sections are filled, maintenance is recommended.
In “Tappet” and “Nozzle” you can see the current values as well as the respective reference value.
If a heater is used, instead of “Ready” the current temperature is displayed.