Vermes MDS 3200+ Series, Руководство пользователя, Страница: 32 / 125

32
VTK-VS-BA-015e-A | User Manual MDS 3200+ Series | Initial Operation
5.2 First Assembling of the MDV
Some elements of the equipment are usually delivered in preassembled state. If not, you
can find the assembling of the fluid box in chapter 8.3.5 and the montage of the tappet in
chapter 9.3. Always make sure all screw couplings sit tight.
Proceed as follows:
Step 1: Separate the nozzle unit from the fluid box.
(1)
Step 2: Mount a nozzle insert.
(2+3)
−
Unscrew the tappet guidance from the nozzle adjusting nut. Use the nozzle exchanging
tool MDT 303.
−
Place the nozzle insert onto the tip of the tappet guidance; the large face of the nozzle
insert has to point down. Firmly reattach the tappet guidance to the nozzle adjusting nut.
Use tools MDT 301 and MDT 302. Make sure to keep the tool MDT 303 upright until the
tappet guidance is fastened completely. Otherwise the nozzle insert might drop out.
Step 3: Mount the nozzle unit.
(4)
−
Screw the assembled nozzle unit
(tappet guidance with seal, nozzle adjusting nut and
nozzle insert)
to the fluid box
(2–3 rotations, to be executed manually)
.
Step 4:
Install the fluid supply.
(5+6+7)
−
Slide the cartridge holder onto the side of the MDV, the magnets must face towards the
valve. Depending on the size of the cartridge, you might have to add an insert into the
cartridge holder
(see pictures next page)
.