VERITAS 5250, Руководство по установке оборудования

Страница: 80 / 151

4
Locate the DIMM chip or DIMM chips that you want to remove.
5
Open the retaining clips at each end of the socket.
6
Hold the DIMM by the edges and lift it from the socket.
Caution: Always hold the edges of the DIMM. Do not touch the front or the
back of the DIMMs.
7
Place the DIMM in an ESD-protective bag.
Caution: If you must place more than one DIMM in an ESD-protective bag,
be sure that the edge connectors do not touch.
8
Repeat these steps to remove the other 8GB DIMMs.
9 Install the replacement DIMM as follows:
■
Make sure that the retaining clips on the socket in which you want to install
the DIMM are open.
■
Locate the gap in the connector edge of the DIMM as shown in the image
below.
80 Adding one or more storage shelves to an operating appliance that does not have any storage shelves
Installing the Expansion Storage Kit components