VERITAS 5250, Руководство по установке оборудования

Страница: 147 / 151

4
Type Hardware ShowHealth and press Enter . Verify that the new storage
devices appear. If the new storage devices do not appear, check the cable
connections and make sure that the power is on.
5
At the prompt, type return to return to the Main menu.
6
Perform a scan as follows:
■
At the Main_Menu prompt, enter
Manage
and press
Enter
.
■
Enter
Storage
and press
Enter
.
■
Enter
Scan
and press
Enter
.
The scan takes a couple of minutes to complete.
7
Navigate to the Storage view.
From the Storage menu, enter Add and press Enter . It displays the disks that
are in a New Available state and can be added. Copy a disk ID that is
displayed.
8
At the prompt, enter add < disk ID > and press Enter . < disk ID > is the disk
ID that you copied. Repeat step 7 and 8 to add each disk ID that is displayed.
9
View the available storage space as follows:
■
Navigate to the Storage menu.
■
At the prompt, enter Show Disk and press Enter . The status of the newly
added disks is displayed as In Use and space in the Unallocated column
is the disk space available for the new disk.
Adding the disk space of additional storage
shelves from the NetBackup Appliance Web
Console
The following procedure describes how to add new storage shelf disk space to a
NetBackup appliance using the NetBackup Appliance Web Console.
To add new storage shelf disk space to a NetBackup appliance using the
NetBackup Appliance Web Console
1
Launch the NetBackup Appliance Web Console and verify that the new storage
devices appear on the
Monitor > Hardware page. If the new storage devices
do not appear, check the cable connections and make sure that the power is
on.
2 Click Manage > Storage .
147 Adding the disk space of additional storage shelves
Adding the disk space of additional storage shelves from the NetBackup Appliance Web Console