VERITAS 5250, Руководство по установке оборудования

Страница: 66 / 151

Based on how you want to connect to the appliance, you can configure the IPMI
by using one of the following procedures:
See “To configure the IPMI port by using a keyboard and monitor” on page 66.
See “To configure the IPMI by using the eth0 port” on page 68.
To configure the IPMI port by using a keyboard and monitor
1
Connect the following components to the appropriate ports on the rear panel
of the appliance:
■
A standard video cable between the VGA (Video Graphics Array) port and
a computer monitor.
■
A USB keyboard to a USB port on the appliance.
2
Verify that the appliance is turned on.
Once the startup process is complete, a login prompt appears.
3
Enter the username and password for the appliance. By default, the user name
is
admin
and the password is
P@ssw0rd
where 0 is the number zero.
4 At the Main_Menu prompt, type Support to navigate to the Support menu.
5
From the Main_Menu > Support view, enter the following command to
configure the remote management port:
IPMI Network Configure < IPAddress > < Netmask > < GatewayIPAddress >
where IP address is the new IP address of the remote management port. The
Subnet mask and Gateway enable connectivity between your network computer
and the remote management port.
The remote management port must be configured as a DHCP or static address.
At any point in time, you can run the following command to see the IPMI network
details:
IPMI Network Show
66 Installation procedures
Configuring the IPMI port from the NetBackup Appliance Shell Menu