VERDER CARBOLITE GERO ABA 7/35B, Инструкции по установке, эксплуатации и обслуживанию, Страница: 69 / 94

Fig 71 - Screen-view: Single Point Calibration
20.2 Dual Point Calibration
Dual Point Calibration uses two offset values and creates a linear temperature slope
between the two values (see Fig 72.).
Home Screen
→
Main Menu
→
System Configuration
→
Temperature Calibration
Select “Dual Point” Calibration.
In the “Low Temperature Point” box enter the lower temperature at which you want to
apply your offset.
In the “Offset” box enter the offset value for the low temperature point.
The “Calibrated Temperature” box will then display the result of the offset at the
selected “Temperature Point”
In the “High Temperature Point” box enter the higher temperature at which you want to
apply your offset.
In the “Offset” box enter the offset value for the high temperature point.
The “Calibrated Temperature” box will then display the result of the offset at the
selected “Temperature Point”
Select “Validate” and the temperature displays below the Validate button will show the
“Non- Calibrated Temperature” and calculated “Calibrated Temperature” of the current
chamber temperature.
Once the required offset has been validated and the calibrated temperature is
confirmed, then select the green tick at the top of the screen, the values will be
accepted and the display will return to the System Configuration screen (see Fig 35.).
69
20.0 Temperature Calibration