VEMAG ROBOT HP7C, Руководство по эксплуатации, Страница: 29 / 94

3. Installation and commissioning ROBOT HP7C / HP10C / HP15C / HP17C
3-9 © VEMAG 2004
• Check that the trolley hoist is level using a spirit level, and push a
trolley right into the trolley hoist.
Warning!
Check whether the locking lever (1) is properly locked and is holding the
trolley securely in the trolley hoist.
• Then lock the stop screw with the guard nut again.
• If the trolley hoist (1) is correctly level, pull the stop bar (2) out far
enough for the gap between the bar and the trolley hoist to be 5 mm
and tighten up the four mounting bolts (3) again.
1
1 Locking lever
Fig. 3-11
Locking the trolley in
position
3
2
1 Trolley hoist
2 Stop bar
3 Mounting bolts
Fig. 3-12
Setting the stop
1