33
7 Set up with the display and adjustment module
VEGABAR 86 • Secondary Device for electronic differential pressure
48048-EN-220817
To prevent unintentional or unauthorized adjustment, the instrument
is protected (locked) against all parameter changes while in normal
operating condition.
For each parameter change you have to enter the PIN of the instru-
ment. In delivery status, the PIN is "0000".
Change parameters
You can find a description below the respective parameter.
Lock adjustment and verify modified parameters
You can find a description below the parameter "
Setup - Lock adjust
-
ment
".
7.1.1 Setup
In this menu item you activate/deactivate the Secondary Device for
electronic differential pressure and select the application.
The VEGABAR 86 in conjunction with a Secondary Device can be
used for flow, differential pressure, density and interface measure-
ment. The default setting is differential pressure measurement.
Switchover is carried out in the adjustment menu.
If you have connected
a
Secondary Device, you confirm this with "
Activate
".
Note:
It is absolutely necessary to activate the Secondary Device to have
the applications displayed in the electronic differential pressure meas-
urement menus.
Enter the requested parameters via the appropriate keys, save your
settings with
[OK]
and jump to the next menu item with the
[ESC]
and
the
[->]
key.
In this menu item, you determine the units for the "
Min. adjustment/
Zero
" and "
Max. adjustment/Span
" as well as the static pressure.
Application
Units
