Vega VEGABAR 86 Скачать руководство пользователя страница 12

Страница: 12 / 76

3 Product description

VEGABAR 86 • Secondary Device for electronic differential pressure

48048-EN-220817

Up to the time of installation, the packages must be left closed and

stored according to the orientation and storage markings on the

outside.
Unless otherwise indicated, the packages must be stored only under

the following conditions:

•

Not in the open

•

Dry and dust free

•

Not exposed to corrosive media

•

Protected against solar radiation

•

Avoiding mechanical shock and vibration

•

Storage and transport temperature see chapter "

Supplement -

Technical data - Ambient conditions

•

Relative moisture 20 … 85 %

With instrument weights of more than 18 kg (39.68 lbs) suitable and

approved equipment must be used for lifting and carrying.

3.4 Accessories

The instructions for the listed accessories can be found in the down-

load area on our homepage.

The protective cover protects the sensor housing against soiling and

intense heat from solar radiation.

Screwed flanges are available in different versions according to the

following standards: DIN 2501, EN 1092-1, BS 10, ASME B 16.5,

JIS B 2210-1984, GOST 12821-80.

Welded sockets are used to connect the devices to the process.

Threaded and hygienic adapters enable simple adaptation of devices

with standard threaded fittings to process-side hygiene connections.

Storage

Storage and transport

temperature

Lifting and carrying

Protective cover

Flanges

Welded socket, threaded

and hygienic adapter

Содержание VEGABAR 86













































































Результаты поиска

Содержание VEGABAR 86

Отзывы:

Бренды по названию

Популярные бренды

Vega VEGABAR 86, Руководство по эксплуатации

Результаты поиска

Содержание VEGABAR 86

Отзывы:

Бренды по названию

Популярные бренды