32
7 Set up with the display and adjustment module
VEGABAR 86 • Secondary Device for electronic differential pressure
48048-EN-220817
7 Set up with the display and adjustment
module
7.1 Parameter adjustment
The main menu is divided into five sections with the following func-
tions:
Setup:
Settings, e.g., for measurement loop name, application, units,
position correction, adjustment, signal output
Display:
Settings, e.g., for language, measured value display, lighting
Diagnosis:
Information, e.g. on instrument status, peak indicator,
measurement reliability, simulation
Additional adjustments:
PIN, date/time, reset, copy function
Info:
Instrument name, hardware and software version, date of manu-
facture, sensor features
In the main menu item "
Setup
", the individual submenu items should
be selected one after the other and provided with the correct param-
eter values.
The following submenu points are available:
In the following section, the menu items from the menu "
Setup
" for
electronic differential pressure measurement are described in detail.
Depending on the selected application, different sections are relevant.
Information:
Further menu items of the menu "
Setup
" as well as the complete
menus "
Display
", "
Diagnosis
", "
Additional adjustments
" and "
Info
"
are described in the operating instructions of the respective Primary
Device.
A parameter change with SIL qualified instruments must always be
carried out as follows:
•
Unlock adjustment
•
Change parameters
•
Lock adjustment and verify modified parameters
This ensures that all modified parameters have been deliberately
changed.
Unlock adjustment
The instrument is shipped in locked condition.
Main menu
Operating sequence
