VeEX VePal TX130M+, Руководство пользователя

Страница: 147 / 175

Go back to top Go back to ToC
22.2 DS1 Loop
Tap the DS1 Loop icon to display the shortcut screen shown below.
DS1 Loop DS1 Loop Menu
Loopback Control:
Tap the Loop Icon located at the top of the screen to select Up (Loop Up) or Down (Loop Down).
Loop Up:
1. Send a known test pattern and check if the pattern is received. If received, declare “pre-exist loop” and stop.
2. Send the loop up code for 5 seconds. If in-band, check if the loop up code is returned. If out of band (ESF FDL), send a
known pattern in the payload and check if the known pattern is returned. If not returned in 10 seconds, declare loop up
failed.
Loop Down:
1. Send a known test pattern and check if the pattern is received. If not received, declare “loop down” and stop.
2. Send the loop down code for 5 seconds. Same as loop up but check for the return code disappeared.
_e-manual_D07-00-051P_RevD00