Latency tab:
User configures:
Test:
Throughput Rate or Custom Rate. The default value is throughput.
Throughput rate:
Latency test will be performed at the throughput rate found for each of the tested frame sizes.
Custom rate:
User configures a custom rate in % or Mbps.
Rate:
Only available if Custom Rate is selected. Enter up to 100% of the negotiated line rate or enter the rate in Mbps.
Duration:
5 to 999 seconds. The default value is 20 seconds.
This is the amount of time that the latency test will be performed for each test frame size.
Repetitions:
1 to 100. The default value is 1.
This is the amount of times that the latency test will be repeated for each test frame size.
RFC 2544 Setup - Latency Throughput Rate
RFC 2544 Setup - Latency Custom Rate
Frame Loss tab:
/ e_Manual D07-00-050P RevD00
Page 45 of 115
