VeEX VePAL MX120e+, Руководство пользователя

Страница: 28 / 115

Go back to top Go back to ToC
MPLS Tab:
In the MPLS tab the following parameters are configured:
MPLS label:
Can be configured in the range 16 through 1,048,575 (labels 0 to 15 are reserved).
Note:
Composed of 20 bits which allows for the creation of over one million labels.
CoS:
Can be configured in the range 0 to 7.
Note:
This field is three bits in length and maps directly to IP Precedence TOS bits to provide Class of Service
(COS).
S-bit:
Can be configured 0 or 1.
Note:
The S field is one bit in length and is used for stacking labels. This is important as it is used to indicate the last
label in the label stack.
TTL:
Can be configured in the range 0 to 255. The default setting is 128 hops.
Note:
Used to decrement the time-to-live counter.
BERT Setup - Header with MPLS Label BERT Setup - MPLS Label Summary
Go back to top Go back to ToC
IP Tab:
In the IP tab the user must configure the destination IP address and source address. The user may also configure
the following IP header fields:
IP Type:
IPv4
/ e_Manual D07-00-050P RevD00 Page 28 of 115