Speed:
Only available when auto-negotiation is off. Select from 10Mbps, 100Mbps, or 1000Mbps when the 10/100/1000T
port is selected. 100 Mbps for 100Base-FX. 1000Mbps/1Gbps is fixed when the 1000Base-X port is selected.
Duplex:
Only available when auto-negotiation is off for the 10/100/1000T port. Select from half or full duplex modes.
Flow control:
On or Off. Once the operating mode and interfaces are selected, the user can independently configure the
auto-negotiation, speed, duplex, and flow control settings for each port (where applicable).
When flow control is enabled, the test set will respond to pause frames received by the link partner by adjusting the
transmit rate.
When flow control is disabled, the test set ignores all incoming pause frames from the link partner and continues
transmitting at the configured transmit rate.
6.2 Port Status
Copper Port Status
Page #1
Copper Port Status
Page #2
Copper Port Status
Page #3
/ e_Manual D07-00-050P RevD00
Page 20 of 115